The MB&F HM12 The Guardian is a titanium wristwatch that doubles as the head of a robot. It comes with a 38.2 cm robot body that L’Epée 1839 built, so you get a watch and a desk companion in one set. MB&F will make only 36 sets, and the price is CHF 280,000 excluding VAT.
It all started with a simple question from founder Maximilian Büsser: could a robot’s head be a watch? Designer Maximilian Maertens then spent four years working out the answer, according to MB&F’s press document. In fact, MB&F says the movement and case design alone took more than four years.
This guide explains how the watch works and what the robot does. Next, it lists the specifications. Finally, it covers price and availability, so you can see what is confirmed.
- Price: CHF 280,000 excluding VAT
- Edition: 36 sets, split into 12 green, 12 blue and 12 purple
- Watch: Grade 5 titanium case, flying tourbillon and 84-hour power reserve
- Robot: 38.2 cm tall, about 15 kg, built by L’Epée 1839
How the HM12 works as a robot’s face
From the front, the HM12 looks like a face. The two time displays sit where the eyes would be. On the left, the hours jump instantly from one number to the next, while the minutes show on a second disc on the right. Both discs turn, but you read them at a fixed point.
Below the eyes, part of the micro-rotor sits where the mouth would be. This small rotor also winds the watch as you move your wrist, and MB&F shaped it like the MB&F battle-axe. Then, above the eyes, a flying tourbillon acts as the brain. A tourbillon is a small rotating cage that helps offset the effect of gravity on accuracy. Because a flying tourbillon has no upper bridge, nothing blocks the view. Here it is deliberately exposed, so you can see it through the sapphire section of the case.
Still, the face shield is the most unusual feature. When you turn the left crown, mechanical shields slide across the dial, and you can stop them anywhere between fully open and fully closed. According to MB&F, the system is entirely mechanical, so it works independently of the movement. More than 200 components drive the shields. In other words, MB&F says the mechanism is more complex than many complete mechanical watches.
Calibre HM12 and the titanium case
Inside, the in-house Calibre HM12 has 646 components and 86 jewels. It winds automatically through a double-sided micro-rotor. It also stores 84 hours of power. In addition, MB&F says most of the parts are hand-finished.
The case is Grade 5 titanium. It measures 49.3 mm long, 43.6 mm wide and 13.8 mm high. Three sapphire crystals let in light, so the movement is easy to see from several angles: one on top, one on the back, and a small window at 12 o’clock over the tourbillon.
The back of the watch looks more classical than the front. Softly curved bridges carry hand finishing, and the domed rotor also carries a guilloché pattern, which is a fine, repeating engraved design. Kari Voutilainen and his team helped create that pattern. Because the rotor is curved, it was a demanding job.
The Guardian robot by L’Epée 1839
L’Epée 1839, a long-time MB&F partner, developed the robot. It has 755 components and stands 38.2 cm tall, including its 22 cm wide base. It also weighs about 15 kg.
Indeed, the robot is more than a stand. A mechanical thermometer sits in its chest. Meanwhile, one arm carries a shield with a built-in loupe, so you can inspect the movement. The other arm, however, holds a detachable UV torch. It also charges the Super-LumiNova glow material on both the watch and the robot.
To use it, you first detach the watch from its strap with a quick-release system. Then you clip the watch onto the robot’s head, and a hidden drawer in the base stores the strap. MB&F says it designed the robot as a body around the watch, not as a display stand. Overall, each complete unit has nearly 1,500 components.
Editions, price and availability
The HM12 The Guardian comes in three editions: green, blue and purple. MB&F makes 12 of each, so 36 exist in total. In addition, the brand says these will be the only ones ever made.
The price is CHF 280,000 excluding VAT, and the robot is included. Availability is by enquiry, so MB&F’s website is the best place to start.
Dollar figures vary, because exchange rates and taxes change. At launch, Hypebeast reported about USD 384,000, while another outlet quoted roughly USD 350,000. So treat any dollar amount as approximate and use the Swiss franc price as the reference. Also, this is a retail price, not a market value, and Dial Chrono does not treat limited editions as investments.
Why the HM12 matters for MB&F
The HM12 is the first Horological Machine that Büsser and Maertens conceived and developed entirely themselves. For 20 years, however, MB&F worked with designer Eric Giroud, who remains a partner on other projects. Until now, Maertens’ work was mainly visible in the clocks and music boxes MB&F makes with L’Epée and Reuge.
MB&F first imagined the piece for its 20th anniversary. However, development took far longer than expected, so the watch ended up opening the brand’s third decade.
For collectors, the key points are simple. First, the edition is closed at 36 sets. Second, the watch comes with a large companion object. Finally, the price is a retail figure, not a resale value. Because this article includes no resale data, it makes no claim about the secondary market.
MB&F HM12 The Guardian specifications
| Movement | In-house automatic · double-sided micro-rotor · flying tourbillon · instantaneous jumping hours · trailing minutes · face shield function |
| Calibre figures | 646 components · 86 jewels · 84-hour power reserve |
| Case | Grade 5 titanium · 84 components · 49.3 × 43.6 × 13.8 mm · three sapphire crystals · mobile lugs at 12 o’clock, fixed lugs at 6 o’clock |
| Finishing | Guilloché rotor dome made with the involvement of Kari Voutilainen’s workshop · hand-finished bridges · grained mainplate |
| Strap | Quick-release · Velcro fastening · 20 mm lug width and buckle |
| Water resistance | Not stated in MB&F’s press document |
| Robot | L’Epée 1839 · 755 components · 22 cm diameter × 38.2 cm height including base · about 15 kg |
| Robot features | Mechanical thermometer · loupe in right-arm shield · detachable UV torch on left arm · strap drawer in the base |
| Combined unit | Nearly 1,500 components |
| Editions | Green, blue and purple · 12 pieces each · 36 in total |
| References | 12.TL.GR (green) · 12.TL.BL (blue) · 12.TL.PU (purple), as listed by Watches of Switzerland |
| Price | CHF 280,000 excluding VAT |
Frequently asked questions
How much does the MB&F HM12 The Guardian cost?
The retail price is CHF 280,000 excluding VAT. At launch, dollar conversions ranged from roughly USD 350,000 to USD 384,000, so use the Swiss franc price as the reference.
Can you buy the watch without the robot?
MB&F delivers the HM12 with The Guardian and describes the two as one. However, we have not seen a watch-only version announced.
How many HM12 The Guardian watches will be made?
Thirty-six sets exist: 12 in green, 12 in blue and 12 in purple. MB&F also says there will be no more.
Who built the Guardian robot?
L’Epée 1839 built the 755-component robot. It is also a long-standing MB&F partner.
Sources and further reading
We checked specifications and prices on 1 November 2026 against MB&F’s press document and independent coverage. However, figures are as published at launch in June 2026, so check MB&F for updates. Dial Chrono is an editorial publication and does not sell watches.
